|
| Tubes & Pipes |  |
Galvanized / Cold Rolled Sheets-Coils | |
Coal Division | |
Hollow Sections | |
Steel Structure | |
International Trading Division |
|
CR / GI SHEETS - COILS  |
  |
 |
 |
TECHNICAL SPECIFICATION |
 |
|
 Technical Specification for Cold Rolled Steel The state-of-art 4 Hi, 1000mm. wide cold rolling mill is efficient to maintain close thickness tolerance and flatness to meet demand from wide spectrum of manufacturer and all O.E.M requirements. |
|
|
| Product | Thickness (mm) | Width(mm) | Coating (gms/m) | Finishing | Coils / Pkt. Weitht (mt) | Standards |
| Hot Dipped Galvanized Coils | 0.14 to 1.25 | 600-1000 | 100-300 | Chromated & Dry | 30mt-10mt | JIS G
3302 IS277 |
| Plain Sheets | 0.14 to 1.25 | 600-1000 | 100-300 | Chromated & Dry | 30mt-10mt | |
| Corrugated Sheets | 0.14 to 0.80 | 762-1000 | 100-300 | Chromated & Dry | 30mt-10mt | |
| Cold Rolled Steel Coils | 0.14 to 1.25 | 600-1000 | N.A | As Rolled | 30mt-10mt | JIS G 3141 |
| Plain Sheets | 0.14 to 1.25 | 600-1000 | N.A | As Rolled | 30mt-10mt |
| Products | Thickness (mm) | Width(mm) | Coating (gms/m) | Finishing | Coils / Pkt. Weitht (mt) | Standards |
| Hot Dipped Galvanized Coils | 0.14 to 1.25 | 600-1000 | 100-300 | Chromated & Dry | 30mt-10mt | JIS G
3302 IS277 |
| Plain Sheets | 0.14 to 1.25 | 600-1000 | 100-300 | Chromated & Dry | 30mt-10mt | |
| Corrugated Sheets | 0.14 to 0.80 | 762-1000 | 100-300 | Chromated & Dry | 30mt-10mt | |
| Cold Rolled Steel Coils | 0.14 to 1.25 | 600-1000 | N.A | As Rolled | 30mt-10mt | JIS G 3141 |
| Plain Sheets | 0.14 to 1.25 | 600-1000 | N.A | As Rolled | 30mt-10mt |
|
|
|
|
Copyright
©, Goodluck Steel Tubes Ltd., All Rights Reserved